Dig a 42" by 10" hole in crushed stone or sand in under 5 Minutes!

Digging in crushed/modified stone or sand used to be difficult and frustrating. Bull Digger makes the process easy and efficient. Place a PVC or fiber tube sleeve of 6” or larger in diameter around the outside of your Bull Digger. The tube should be as long as the depth and width of the hole you want to dig. Use Bull Digger to break up, remove and contain the fill. As the hole gets deeper, The Bull Digger's handles were designed to push the tube into the hole preventing the sides from caving in. Remove the Bull Digger from the sleeve. The result is a clean hole.

After back filling the hole with concrete or soil, either remove or leave the tube in place. Congratulations, you have just saved hundred of dollars over the daily rental fees of a Vacuum Excuvating Truck. Digging in crushed stone or sand has never been easier.